How To Deal With Mercedes Vacuum Door Lock Failure

Isn’t it frustrating when you try to get into your Mercedes only to realize that the vacuum door locks are not functioning as they should? A vacuum door lock system used in a Mercedes is not like the usual electronic lock system. They use air pressure generated from a vacuum pump to operate the locks. When you press the lock or unlock button the pump creates a vacuum which signals the actuators found in the doors. These actuators either open or close the doors in relation to the signal they receive in the system. This system is very efficient and almost completely silent, but it is susceptible to some problems over time, which result in the complete breakdown of the locking system.

Sometimes the lock issue may affect only one door and at other times, it may extend to all the doors in the car. Mercedes vacuum door lock issues are normal on models that are older. However, the good news is that this particular issue is not always very difficult to fix and it doesn’t have to cost a lot of money. Now that we know how this door lock mechanism works, let’s find out how to detect a fault in the system and how you can fix your door locks if it gives you problems. Keep on reading to find out more about how you can revive your Mercedes vacuum door locks.

Troubleshooting Vacuum Door Lock Problem

  • Listen for Sounds: First, take your time to listen when you attempt to lock or unlock the doors. If you hear the pump working but the locks do not engage it can be due to a vacuum leak or door actuator. However, if there is no sound at all, it may be the pump that has let you down.
  • Check for Leaks: Check the vacuum lines that are easily accessible around the doors for cracks, and disconnected or damaged lines. You may not be able to observe all the lines at once but some of the lines will definitely be in a place where you can see them..
  • Test Individual Doors: Close all the doors and open them one by one in order to determine whether some of the doors only are problematic. If only one door is not operating, it is probable the actuator of that particular door is faulty.

Tips and Tricks to Repair Vacuum Door Lock

  • Replace the Pump: If the central vacuum pump has gone bad, then getting a new one should solve your lock problems. This can be a little expensive but this is always advisable especially if the pump has worn out.
  • Seal or Replace Damaged Lines: When you realize that you have a leak, it is important to repair the line or purchase a new one. Sometimes small leaks can be sealed as a temporary solution while replacement of the entire lines is often the only permanent remedy.
  • Replace Actuators: If you have a faulty door actuator you will have to replace it for the door to work again. This involves the removal of the door panel which is usually best done by a professional in Mercedes repair.
  • Address Electrical Issues: For problems like a fuse that has blown or a wiring problem amongst others, seek a mechanic. There is nothing as complicated as electrical problems, but at least a technician can figure out what is wrong and fix it in no time.

Why Should You Trust Adair and Sons For Your Mercedes Vacuum Door Lock Repair?

If you are in Round Rock, TX, and dealing Mercedes Vacuum Door Lock Repair with problems like vacuum door lock failure in Mercedes contact us at Adair and Sons. Our skilled team knows the unique features of vacuum doors in Mercedes and has the capability to diagnose these problems and repair them quickly. Whether it is a pump that is not working, a vacuum leak, or an issue with the door actuator, we can identify the problem and fix it to get your Mercedes back to its silky smooth self again. Call us now to make an appointment or to find out more about how we can assist in maintaining your Mercedes in peak condition.

Call Now!